Industrial Tank Coatings and Linings in North Carolina
QC Commercial installs inground concrete tank coatings and linings for waste water treatment plants, , chemical processors, and food and beverage facilities that keep tanks compliant, contained, and out of your maintenance backlog.
Stop Treating a Failing Tank Lining Like a Routine Maintenance Problem
Failing secondary containment linings, contamination risks, and contractors who spec the wrong system for the job. These are the problems waste water treatment managers, plant operators, and facility teams across North Carolina keep running into. QC Commercial delivers tank coatings and linings for water utilities, chemical storage facilities, and food and beverage processors that address all three. Our crews identify the right lining system for your tank type, substrate, and stored contents, and complete the work within your scheduled outage window.
Tanks We Coat and Line
QC Commercial provides tank lining services in North Carolina and the Southeast.
- Potable water and wastewater storage tanks for municipal utilities
- Chemical and solvent storage tanks for industrial and processing facilities
- Food and beverage processing and storage tanks requiring FDA-compliant linings
- Fuel and petroleum storage tanks for industrial operations
Tank Coating and Lining Services for NC Industrial Facilities
From NSF 61-certified potable water linings to chemical-resistant epoxy systems, QC handles every phase of your tank coatings and linings project under one contract. QC crews are experienced preparing worn out concrete enclosures and applying industrial repair mortars to thicknesses up to 4 inches per lift. QC is certified to install various Portland cement mortars such as the SikaTop 123 Plus and A.W. Cook Cemtec Silatec MSM.
Epoxy Tank Lining
Our crews apply high-build epoxy lining systems to steel and concrete tanks, delivering chemical resistance, durability, and long-term interior containment.
Potable Water Tank Coatings
When drinking water compliance is non-negotiable, QC installs NSF 61-certified potable water tank coatings like the Dura-Plate 6000 Reinforced Epoxy on steel and concrete storage tanks.
Chemical-Resistant Tank Linings
Matched to the specific chemical profile of your stored contents, our chemical tank lining systems are built to resist breakdown.
Polyurea and Urethane Linings
For tanks requiring flexibility, abrasion resistance, and a rapid return to service, our crews install fast-cure polyurea and urethane systems.
Surface Preparation and Substrate Repair
Before any concrete lining goes down our crews blast clean, chisel using hammer drills, repair, and profile your tank substrate to full SSPC standards.
Stop a Tank Lining Failure Before It Shuts Down Your Operation
Your stored contents cannot wait for a second application. QC Commercial’s certified crews provide tank lining services across North Carolina. Book a consultation and get a written proposal for your tank coatings and linings installation.
Explore Our Tank Coating and Lining Process
Getting the lining right starts long before your tank goes out of service.
01
Tank Inspection and System Selection
QC inspects your tank, evaluates substrate condition and stored contents, selects the right lining system, and delivers a written proposal before your outage is scheduled.
02
Draining, Cleaning, and Surface Preparation
Your tank is drained, cleaned, and blast-prepared to SSPC standards before any lining material is applied.
03
Lining Application
Lining coats are applied to specification with dry film thickness readings and application condition monitoring at every stage.
04
Holiday Testing, Final Inspection, and Return to Service
Holiday detection testing, client walkthrough, and documentation close the project before your tank returns to service.
Tank Coatings and Linings FAQs
How long do QC’s industrial tank coatings and linings last?
With proper surface preparation and the right system matched to your stored contents, our industrial tank linings typically last ten to twenty years. Substrate prep and system selection are the two variables that determine that range.
What is the difference between a tank coating and a tank lining?
Coatings are thinner film systems applied for corrosion protection. Linings are thicker, higher-build systems designed for direct liquid or chemical contact on the tank interior. QC installs both depending on your tank application.
Do you work on both steel and concrete tanks?
Yes. QC installs lining systems for steel and concrete tanks. Surface preparation methods and coating systems differ by substrate and stored contents, and QC specs accordingly.
What compliance standards do your tank linings meet?
QC installs NSF 61-certified systems for potable water contact applications and FDA-compliant linings for food and beverage tanks. Specific compliance requirements are confirmed during system selection.
How long does a tank need to be out of service for relining?
It depends on tank size, surface condition, and the lining system selected. QC coordinates with your operations team to establish the outage window before work begins and schedules the project to meet it.
Get Your Consultation Scheduled Today
QC Commercial brings over 20 years of experience as a trusted provider of commercial painting in North Carolina to every facility that walks through the door. Let’s talk through what your project needs.